Sherwood Wood Infill / Metal Side Entry Gate

This is our stunning Sherwood  metal frame / wood infill side entry gate. The gate has a built in locinox lock which can be operated from either side and the wood is inserted into the gate frame and is easily removable when needed to be replaced.

This is a great alternative to a completely wooden gate as it still gives the privacy and security but will not twist or sag like a traditional wooden gate due to the strong metal frame.

Note: All timber used in our gates is now pressure treated (tanalised) and stained with 3x coats to extend the life of the wood.

• 6ft (1.83m) or 7ft (2.13) tall – please select size below.
• Locinox lock and catch included
• 40x12mm convex top bar.
• 40mm box section sides
• 25x5mm flat bar inner frame.
• 115mm wide x 19mm thick pressure treated wood.
• The wood is pressure treated (tanalised) and 3 coats of medium oak stain applied.
• Painted black frame with optional galvanising to prevent rust
• Supplied with wall mounted fixing posts.
• Supplied with adjustable hinges and fixing bolts.
• The Widths listed are the gap you have between your walls or posts, we then work out of the size of the gate.
  If you need gate posts, remember to allow space for these.
  Gate height is measured from the bottom of the frame to the highest point on the gate.

  Note: this gate includes wall mounted posts so please order the gap between walls - contact us if in doubt.

  Don't forget to allow for ground clearance too - typically 60mm.